Hioki MEMORY HiCORDER MR8880-20

Distributor for Hioki Indonesia,recorders,power meter,clamp testing,field measuring instruments,multimeters,signal generators,safety test...

Distributor for Hioki Indonesia,recorders,power meter,clamp testing,field measuring instruments,multimeters,signal generators,safety testing,component testing,environmental measuring

MEMORY HiCORDER MR8880-20

          

Capture high- to low-voltage signals in a single device! Rugged, Professional and Ready for the Field

CAT III 600 V insulation performance; Can measure directly 480 V power line. 4 completely isolated channels let you simultaneously record data on a 3-phase power line plus have one extra channel Tough against harsh environments; Operating temperature range -10°C to 50°C Built to withstand mechanical shocks and vibrations (ships standard with side protectors) Make settings easily with PRESETS function

Note: Input cords and Battery pack are not included. Purchase the cords appropriate for your application separately. Printer unit MR9000 is the optional, sold separately.

Basic specifications (accuracy guaranteed for 1 year)

Number of channels	4 analog channels + 8 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND
Measurement ranges (10 div full-scale)	4 channels of voltage measurement; mode switchable between instantaneous waveform, or RMS value 10 mV to 100 V/div, 13 ranges, resolution: 1/640 of range RMS value mode: 30 Hz to 10 kHz, Crest factor: 2
Max. rated voltage	Between terminals: 600 VAC, DC Between terminal to earth: 600 VAC, DC CAT III, 300 VAC, DC CAT IV
Frequency characteristics	DC to 100 kHz (±3dB)
Time axis (High-speed function)	100 μs to 100 ms/div, 10 ranges, Sampling period: 1/100 of range
Recording intervals (Real-time function)	100 μs to 1 minute, 19 selections (simultaneous sampling in all channels)
Measurement functions	High-speed function (high speed recording) Real-time function (actual time recording)
Memory capacity	14-bits × 1M-Words/ch (1 word = 2 bytes)
Removable storage	CF Card slot ×1 (Up to 2 GB), USB 2.0 memory ×1
Printing	[Printer unit is option] 112 mm (4.41 in) × 18 m (59.06 ft), thermal paper roll, Recording speed : 10 mm (0.39 in)/sec Note: Printing is not supported when using alkaline batteries
Display	5.7-inch VGA-TFT color LCD (640 × 480 dots)
Displayable languages	English, Japanese, Chinese
Communication interfaces	USB 2.0 mini-B receptacle × 1; Transfers files from the installed CF card or USB memory stick to a PC when connected, and External PC control
Power supply	AC ADAPTER Z1002: 100 to 240 VAC (50/60 Hz), 11 VA (when Real-time recording) , 40 VA (when Real-time recording and printing) BATTERY PACK Z1000: AC adapter has priority when used in combination with battery pack, recharge with AC adapter 3 hours, Continuous use 3 hours (at back-light ON) LR6 (AA) alkaline batteries × 8, Continuous use 40 minutes, (with back-light ON, cannot be used with the PRINTER UNIT) DC power supply: 10 to 28 VDC (cable available by special order)
Dimensions, mass	205 mm (8.07 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 1.66 kg (58.6 oz) (with the BATTERY PACK installed) When printer is combined – with main unit: 303 mm (11.93 in) W × 199 mm (7.83 in) H × 67 mm (2.64 in) D, 2.16 kg (76.2 oz) (with the BATTERY PACK installed)
Supplied accessories	Instruction Manual × 1, AC ADAPTER Z1002 × 1, Alkaline battery box × 1, Strap × 1, USB cable × 1, Application Disk (Wave Viewer Wv, Communication Commands table) × 1